Even a simple event needs someone responsible for sound. Having microphones and speakers ready is a start, but someone still needs to balance speech and video levels, cue the music and check what goes into the recording. That does not mean every event needs a large audio crew. The right scope depends on the program and the venue.
If a venue says “basic audio included,” ask what that covers. Does it mean equipment is available, or is an operator included throughout the event? As we discussed in our guide to event screen operation, separating the equipment from the person operating it makes planning easier. The same applies to audio.

If the venue has microphones, is audio covered?
Start with how many people will speak at once and how the event will run, rather than simply counting microphones. A host and presenter taking turns, a panel discussion and audience questions each call for a different setup. Check the program to see whether the venue's microphones are enough or whether you also need one for questions and a spare.
Renting extra microphones is not the whole job. Wireless receivers, mixer input channels, compatible frequencies and battery replacement all need attention too. An audio team can help determine the right quantity and check that each signal reaches the control position. More microphones also mean more to manage, especially when several are open at once, so it is worth preparing only what the event needs.
You do not need to arrive with a complete equipment list. Sharing the event conditions below is a useful starting point for a conversation with the venue or audio operator.
| Event condition | What to check with the venue or audio operator |
|---|---|
| Host and presenters take turns | How microphones will be handed over and who will switch them on and off |
| Several people speak together | Microphones for simultaneous speakers, plus available receivers and input channels |
| Audience Q&A | The route and person responsible for passing the question microphone |
| A long program or movement around the venue | A spare microphone and a battery checking and replacement plan |
Can you fix feedback by simply turning the sound down?
Feedback occurs when sound from a speaker is picked up by a microphone and amplified repeatedly. A large room or multiple speakers are not, by themselves, the cause. You need to consider where microphones and speakers point, the distance between them and how sound reflects off walls and ceilings.

When a presenter moves away from the microphone, the natural response may be to turn their voice up. But that can also make it easier for speaker output and surrounding sound to enter the microphone. Several unused microphones left open make the situation more complicated. An audio engineer can advise speakers on microphone distance, open only the channels needed and adjust gain—the amount of input amplification—as well as overall volume.
Reducing certain frequencies with EQ can help, but EQ alone cannot solve every feedback problem or guarantee it will never occur. First check the position, direction and distance of microphones and speakers. Adjust speaker placement and listening levels across the audience, then use rehearsal to check actual speaking positions and movement. Listen not only from the front row but also from the back: can people hear speech clearly and comfortably in both places?
Isn't background music easy if the files are ready?
Operating background music means more than pressing play. Someone needs to start, end and adjust it to fit the flow of the event. Walk-in music, videos embedded in presentations and award music may all have different recorded levels. An audio engineer checks those differences in advance and adjusts levels as the program unfolds.
For example, a video following a quiet presentation can sound suddenly loud even with the same settings. When the video ends and the host starts speaking, any remaining music or video audio needs to be brought down so it does not cover their voice. A single fixed computer volume makes these transitions difficult to manage precisely.
At an awards ceremony or signing ceremony, suitably dramatic music can help set the mood as people come onstage. But louder or more grand is not always better. Choose music that suits the occasion and leaves the host's words clear, and prepare cues for entrances, photographs and exits—including a natural fade when needed.

A non-specialist can certainly play music, particularly for a simple, repetitive program. But when a screen change and a music fade need to happen at the same moment as the host's remarks, one person may have little room to handle both. It helps to agree in advance on who handles screens, who handles sound and who gives each cue. Our guide to adding screen details to an event cue sheet can also help you document music start and end cues.
If it sounds good in the room, will the recording sound good too?
It is worth checking the sound heard by the audience and the sound captured in the recording separately. If a camera records only the room speakers, it also picks up room reverberation and nearby conversations, and the result is affected by the distance between the speakers and the camera. Speech that was understandable in the room can sound distant on playback.
Even when using the venue's built-in PA, ask whether a recording connection is available. Depending on the equipment, you may have an independent or auxiliary (AUX) output, separate output-level control and a suitable route to the recording device—or you may not. Having a socket is not enough: the sending output and receiving input levels also need to be matched.
After connecting a separate feed, listen through headphones and make a short test recording. Play it back to check not just that a signal is present, but that it is neither distorted by being too loud nor too quiet, and that video audio and the audience-question microphone are captured too.

The room mix aims for comfortable listening in the venue; the recording mix aims for clear speech in the finished record. A balance that works through the room speakers will not always work as a recording. Decide in advance how clearly speech needs to come through, how much applause and room atmosphere to retain, and what can be adjusted through a separate output. That can also make later editing easier.
If people are attending online, there is another audio path to check in addition to the recording. See our guide to why in-room and Zoom audio can differ.
How should a small event divide these responsibilities?
Rather than determining the size of an audio team from attendance alone, consider how many tasks need to be handled at once and what needs to be recorded. Start by defining the responsibilities and setup that fit the program and venue. Ask whether the venue provides an audio operator throughout the event; if not, decide who will be responsible for sound.
The Remicon conference is one example of how responsibilities can be divided. MOTIONSENSE handled on-site production and screen operation for the 2026 Remicon Quality Management Key Personnel Capacity Building Conference at Hotel ICC in Daejeon on November 10, 2026. There was no separate audio team on site, so the broadcast director also handled basic audio tasks, including background music playback.

You can see the screen setup in the Remicon conference on-site production and screen operation case study.
When speaking with the venue or production team, you may want to ask:
- Does the basic equipment package include an operator who will adjust sound throughout the event?
- What is included for simultaneous speakers, audience questions and spare microphones?
- Can we rehearse presentation videos and background music using the actual event files and cues?
- Is a recording output available, can its level be adjusted, and can we test the actual recording?
- Who will respond when a screen transition and an audio adjustment happen at the same time?
If you are considering MOTIONSENSE's on-site production services, start by sharing the event program, the venue's basic equipment list, whether video or music will be played, and what you would like to record. We can discuss the responsibilities needed based on the information available.
For event audio, start by checking whether someone can look after the sound when it matters—not just how much equipment is available.
Frequently asked questions
Does a presentation-only event need an audio team?
It is still worth assigning someone responsibility for sound. If the venue operator handles microphone adjustments for a short presentation, a separate large equipment team may not be necessary. Check the operator's actual availability and whether the program includes Q&A, video or recording.
Will adding microphones solve feedback?
No. Prepare the number you need, but it is generally helpful to keep unused microphones muted. Feedback requires checking the path from speakers back into microphones, as well as gain and placement.
Will connecting a recording feed automatically improve the sound?
A connection alone does not guarantee quality. Match the output and input levels, then use headphones and a test recording to check that all required microphones and video audio are captured.
Can the screen operator also play music?
Yes. Decide the scope by considering how often screen changes and volume adjustments overlap, the timing of important cues and whether that person has enough capacity to respond if something goes wrong.
In our next post, we will look at how to write start and end cues on an event music cue sheet.
If you are planning event audio and screen operation together, share your program and venue equipment details through our event inquiry form.
